BMW X5 xDrive50i Engine Oil Specs
Engine oil type, capacity & service interval for the BMW X5 xDrive50i (2011–2020). Select your year below for full specifications.
Choose X5 xDrive50i year
Oil grade changes by year
Do not assume every BMW X5 xDrive50i year uses the same oil. Some years specify 0W-40 (years 2020, 2019, 2018, 2017, 2016, 2015, 2012) while others specify 5W-40 (years 2014, 2013, 2011). Select your exact year and engine configuration before buying oil.
Select Year – BMW X5 xDrive50i Engine Oil
10 years foundBMW X5 xDrive50i Engine Oil Specs by Year
All 10 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2020 | 4.4L 8-Cylinder | 0W-40 | 6.5 qt | 10,000 mi | View → |
| 2019 | 4.4L 8-Cylinder | 0W-40 | 6.5 qt | 10,000 mi | View → |
| 2018 | 4.4L 8-Cylinder | 0W-40 | 6.5 qt | 10,000 mi | View → |
| 2017 | 4.4L 8-Cylinder | 0W-40 | 6.5 qt | 10,000 mi | View → |
| 2016 | 4.4L 8-Cylinder | 0W-40 | 6.5 qt | 10,000 mi | View → |
| 2015 | 4.4L 8-Cylinder | 0W-40 | 6.5 qt | 10,000 mi | View → |
| 2014 | 4.4L 8-Cylinder | 5W-40 | 6.5 qt | 10,000 mi | View → |
| 2013 | 4.4L 8-Cylinder | 5W-40 | 6.5 qt | 10,000 mi | View → |
| 2012 | 4.4L 8-Cylinder | 0W-40 | 6.0 qt | 7,500 mi | View → |
| 2011 | 4.4L 8-Cylinder | 5W-40 | 6.5 qt | 10,000 mi | View → |
BMW X5 xDrive50i Engine Oil Guide
The BMW X5 xDrive50i was produced from 2011 to 2020. This model typically uses 0W-40 full synthetic engine oil — a specification common to most BMW X5 -series vehicles.
Selecting the correct oil viscosity for your BMW X5 xDrive50i is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the BMW X5 xDrive50i is every 10,000 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your BMW X5 xDrive50i, always replace the oil filter at every oil change. Using a premium filter — such as the Mann or Mahle filters specified for European engines — ensures proper oil pressure.
Oil change costs for the BMW X5 xDrive50i at a US dealership or independent European specialist typically range from $120 to $200 for a full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some BMW X5 xDrive50i configurations may have different requirements.
BMW engines require BMW Longlife-approved full synthetic oil. Using non-approved conventional oil can damage the variable valve timing (VANOS) system and void your warranty.
BMW engines may consume small amounts of oil between services. Check the oil level via the iDrive display or dipstick every 1,000 miles to avoid running low.