BMW 128i Convertible Engine Oil Specs

Engine oil type, capacity & service interval for the BMW 128i Convertible (2008–2009). Select your year below for full specifications.

Typical Oil Grade
5W-30
Capacity
4.2 qt
Change Interval
7,500 mi
Years Available
2

Select Year – BMW 128i Convertible Engine Oil

2 years found

BMW 128i Convertible Engine Oil Specs by Year

All 2 years
Year Engine Oil Grade Capacity Interval
2009 3L 6-Cylinder 5W-30 4.2 qt 7,500 mi View →
2008 3L 6-Cylinder 5W-30 4.5 qt 7,500 mi View →

BMW 128i Convertible Engine Oil Guide

The BMW 128i Convertible was produced from 2008 to 2009. This model typically uses 5W-30 full synthetic engine oil — a specification common to most BMW 128-series vehicles.

Selecting the correct oil viscosity for your BMW 128i Convertible is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the BMW 128i Convertible is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your BMW 128i Convertible, always replace the oil filter at every oil change. Using a quality filter — such as the Mann or Mahle filters specified for BMW engines — ensures proper oil pressure and prevents unfiltered oil from circulating through the engine.

Oil change costs for the BMW 128i Convertible at a US dealership or independent European specialist typically range from $120 to $200 for a full synthetic service. DIY oil changes cost approximately $60–$90 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some BMW 128i Convertible configurations may have different requirements.

⚠ Important for BMW

BMW engines require BMW Longlife-approved full synthetic oil. Using non-approved conventional oil can damage the variable valve timing (VANOS) system and void your warranty.

Oil Level Check

BMW engines may consume small amounts of oil between services. Check the oil level via the iDrive display or dipstick every 1,000 miles to avoid running low, especially in older models.