Toyota C-HR Engine Oil Specs
Engine oil type, capacity & service interval for the Toyota C-HR (2018–2022). Select your year below for full specifications.
Choose C-HR year
Select Year – Toyota C-HR Engine Oil
5 years foundToyota C-HR Engine Oil Specs by Year
All 5 yearsToyota C-HR Engine Oil Guide
The Toyota C-HR was produced from 2018 to 2022. This model typically uses 0W-20 full synthetic engine oil — a specification common to most Toyota C-H-series vehicles.
Selecting the correct oil viscosity for your Toyota C-HR is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Toyota C-HR is every 10,000 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Toyota C-HR, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.
Oil change costs for the Toyota C-HR at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Toyota C-HR configurations may have different requirements.
Newer Japanese engines (Toyota/Honda/Nissan) require light viscosity oils like 0W-20 or 0W-16. Do not use thicker oils, as it impairs VVT-i systems.
For frequent short trips (under 5 miles) or dust-prone environments, shorten change intervals to 5,000 miles / 6 months to avoid premature wear.