Porsche 911 Targa Engine Oil Specs
Engine oil type, capacity & service interval for the Porsche 911 Targa (2002–2002). Select your year below for full specifications.
Choose 911 Targa year
Select Year – Porsche 911 Targa Engine Oil
1 year foundPorsche 911 Targa Engine Oil Specs by Year
All 1 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2002 | 3.6L 6-Cylinder | 10W-40 | 6.0 qt | 7,500 mi | View → |
Porsche 911 Targa Engine Oil Guide
The Porsche 911 Targa was produced from 2002 to 2002. This model typically uses 10W-40 full synthetic engine oil — a specification common to most Porsche 911-series vehicles.
Selecting the correct oil viscosity for your Porsche 911 Targa is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Porsche 911 Targa is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Porsche 911 Targa, always replace the oil filter at every oil change. Using a premium filter — such as the Mann or Mahle filters specified for European engines — ensures proper oil pressure.
Oil change costs for the Porsche 911 Targa at a US dealership or independent European specialist typically range from $120 to $200 for a full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Porsche 911 Targa configurations may have different requirements.
Porsche requires approved oils (e.g. Porsche A40 or C30) to protect internal chain gears and flat-tappet systems.
Keep strict tabs on oil levels in these performance engines to ensure appropriate flow under high speed or heavy cornering stresses.