Nissan Titan FE 2WD FFV Engine Oil Specs

Engine oil type, capacity & service interval for the Nissan Titan FE 2WD FFV (2009–2009). Select your year below for full specifications.

Typical Oil Grade
10W-30
Capacity
7.0 qt
Change Interval
5,000 mi
Years Available
1

Choose Titan FE 2WD FFV year

Select Year – Nissan Titan FE 2WD FFV Engine Oil

1 year found

Nissan Titan FE 2WD FFV Engine Oil Specs by Year

All 1 years
Year Engine Oil Grade Capacity Interval
2009 5.6L 8-Cylinder 10W-30 7.0 qt 5,000 mi View →

Nissan Titan FE 2WD FFV Engine Oil Guide

The Nissan Titan FE 2WD FFV was produced from 2009 to 2009. This model typically uses 10W-30 full synthetic engine oil — a specification common to most Nissan Tit-series vehicles.

Selecting the correct oil viscosity for your Nissan Titan FE 2WD FFV is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the Nissan Titan FE 2WD FFV is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your Nissan Titan FE 2WD FFV, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.

Oil change costs for the Nissan Titan FE 2WD FFV at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Nissan Titan FE 2WD FFV configurations may have different requirements.

⚠ Viscosity Precaution

Newer Japanese engines (Toyota/Honda/Nissan) require light viscosity oils like 0W-20 or 0W-16. Do not use thicker oils, as it impairs VVT-i systems.

Severe Duty Cycles

For frequent short trips (under 5 miles) or dust-prone environments, shorten change intervals to 5,000 miles / 6 months to avoid premature wear.