Mitsubishi Endeavor Engine Oil Specs

Engine oil type, capacity & service interval for the Mitsubishi Endeavor (2004–2004). Select your year below for full specifications.

Typical Oil Grade
10W-30
Capacity
6.0 qt
Change Interval
5,000 mi
Years Available
1

Choose Endeavor year

Select Year – Mitsubishi Endeavor Engine Oil

1 year found

Mitsubishi Endeavor Engine Oil Specs by Year

All 1 years
Year Engine Oil Grade Capacity Interval
2004 3.8L 6-Cylinder 10W-30 6.0 qt 5,000 mi View →

Mitsubishi Endeavor Engine Oil Guide

The Mitsubishi Endeavor was produced from 2004 to 2004. This model typically uses 10W-30 full synthetic engine oil — a specification common to most Mitsubishi End-series vehicles.

Selecting the correct oil viscosity for your Mitsubishi Endeavor is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the Mitsubishi Endeavor is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your Mitsubishi Endeavor, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.

Oil change costs for the Mitsubishi Endeavor at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Mitsubishi Endeavor configurations may have different requirements.

⚠ Viscosity Caution

Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.

Regular Service Check

Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.