2007 Mazda 3 Engine Oil Type, Capacity & Service Interval
Oil Type: 0W-20 · Capacity: 4.5 Quarts · Change Every 7,500 Miles
Engine
2.3L 4-Cylinder
Recommended Oil Type
0W-20
Viscosity grade
Oil Capacity
4.5 quarts
Including filter
Change Interval
7,500 miles
Or 9 months
Oil Filter
Fram CH12107
Compatible part number
Engine Size
2.3L
4 Cylinders
Fuel Type
Gasoline
Manufacturer specified
The 2007 Mazda 3 requires 0W-20 engine oil with a capacity of 4.5 quarts (including filter). The recommended oil change interval is every 7,500 miles or 9 months, whichever comes first. The compatible oil filter is Fram CH12107. Estimated oil change cost at a US service center ranges from $50 to $90.
2007 Mazda 3 Recommended Oil Type & Formulation
For the 2007 Mazda 3, the manufacturer recommends 0W-20 full synthetic engine oil. Using the correct viscosity grade maintains proper lubrication across all operating temperatures and ensures your engine meets fuel economy specifications.
Use synthetic oil with a viscosity of 0W-20 for optimal engine performance in low-temperature conditions.
What does 0W-20 mean? The first number (0W) indicates cold-weather viscosity — lower is better for cold starts. The second number (20) indicates viscosity at operating temperature — higher provides more protection under load.
2007 Mazda 3 Oil Change Interval & Maintenance Schedule
7,500
Recommended Miles
9
Recommended Months
Change oil every 9 months or 7,500 miles, whichever comes first.
2007 Mazda 3 Oil Change Cost Breakdown
| Service Type | Estimated Cost | Notes |
|---|---|---|
| DIY (Parts Only) | $35–$50 | Oil + filter only |
| Quick Lube Shop | $50–$90 | Jiffy Lube, Valvoline, Firestone |
| Dealership | $90–$130 | OEM parts, manufacturer certified |
Prices vary by location and current oil prices. Always get a quote before service.
DIY Oil Change Tips for the Mazda 3
Performing your own oil change on the 2007 Mazda 3 can save $30–$60 per service. You will need: 4.5 quarts of 0W-20 full synthetic oil, a Fram CH12107, a drain pan, and a Mazda-compatible oil filter wrench.
Allow the engine to warm up for 2–3 minutes before draining, then cool for 10 minutes. Torque the drain plug to manufacturer spec (typically 18–25 ft-lbs) to prevent leaks. Reset the oil life monitor if equipped after completing the service.
⚠ Reference Only: Always verify specifications with your official owner's manual. Oil specs may vary by trim level and engine variant. Consult a certified mechanic if unsure.
Estimated Change Cost
Similar 2007 Models
Need More Mazda 3 Maintenance Data?
Our technical specs are updated for 2026. If you noticed an error or need specialized engine data for your specific trim, contact our support team.
Request Specification Update