Mazda 3 DI 4-Door Engine Oil Specs
Engine oil type, capacity & service interval for the Mazda 3 DI 4-Door (2012–2013). Select your year below for full specifications.
Choose 3 DI 4-Door year
Select Year – Mazda 3 DI 4-Door Engine Oil
2 years foundMazda 3 DI 4-Door Engine Oil Specs by Year
All 2 yearsMazda 3 DI 4-Door Engine Oil Guide
The Mazda 3 DI 4-Door was produced from 2012 to 2013. This model typically uses 5W-30 full synthetic engine oil — a specification common to most Mazda 3 D-series vehicles.
Selecting the correct oil viscosity for your Mazda 3 DI 4-Door is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Mazda 3 DI 4-Door is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Mazda 3 DI 4-Door, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.
Oil change costs for the Mazda 3 DI 4-Door at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Mazda 3 DI 4-Door configurations may have different requirements.
Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.
Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.