2013 Ford E250 Van FFV Engine Oil Type, Capacity & Service Interval
Oil Type: 5W-30 · Capacity: 4.6 Quarts · Change Every 7,500 Miles
Engine
5.4L 8-Cylinder
Recommended Oil Type
5W-30
Viscosity grade
Oil Capacity
4.6 quarts
Including filter
Change Interval
7,500 miles
Or 12 months
Oil Filter
Fram PH6607A
Compatible part number
Engine Size
5.4L
8 Cylinders
Fuel Type
Gasoline
Manufacturer specified
The 2013 Ford E250 Van FFV requires 5W-30 engine oil with a capacity of 4.6 quarts (including filter). The recommended oil change interval is every 7,500 miles or 12 months, whichever comes first. The compatible oil filter is Fram PH6607A. Estimated oil change cost at a US service center ranges from $40 to $85.
2013 Ford E250 Van FFV Recommended Oil Type & Formulation
For the 2013 Ford E250 Van FFV, the manufacturer recommends 5W-30 full synthetic engine oil. Using the correct viscosity grade maintains proper lubrication across all operating temperatures and ensures your engine meets fuel economy specifications.
Use synthetic oil for optimal engine performance.
What does 5W-30 mean? The first number (5W) indicates cold-weather viscosity — lower is better for cold starts. The second number (30) indicates viscosity at operating temperature — higher provides more protection under load.
2013 Ford E250 Van FFV Oil Change Interval & Maintenance Schedule
7,500
Recommended Miles
12
Recommended Months
Change oil every 12 months or 7500 miles.
2013 Ford E250 Van FFV Oil Change Cost Breakdown
| Service Type | Estimated Cost | Notes |
|---|---|---|
| DIY (Parts Only) | $25–$40 | Oil + filter only |
| Quick Lube Shop | $40–$85 | Jiffy Lube, Valvoline, Firestone |
| Dealership | $85–$125 | OEM parts, manufacturer certified |
Prices vary by location and current oil prices. Always get a quote before service.
DIY Oil Change Tips for the Ford E250 Van FFV
Performing your own oil change on the 2013 Ford E250 Van FFV can save $30–$60 per service. You will need: 4.6 quarts of 5W-30 full synthetic oil, a Fram PH6607A, a drain pan, and a Ford-compatible oil filter wrench.
Allow the engine to warm up for 2–3 minutes before draining, then cool for 10 minutes. Torque the drain plug to manufacturer spec (typically 18–25 ft-lbs) to prevent leaks. Reset the oil life monitor if equipped after completing the service.
⚠ Reference Only: Always verify specifications with your official owner's manual. Oil specs may vary by trim level and engine variant. Consult a certified mechanic if unsure.
Estimated Change Cost
Similar 2013 Models
Need More Ford E250 Van FFV Maintenance Data?
Our technical specs are updated for 2026. If you noticed an error or need specialized engine data for your specific trim, contact our support team.
Request Specification Update