Dodge Nitro 4WD Engine Oil Specs

The Dodge Nitro 4WD was produced from 2007 to 2011. This model typically uses 5W-30 full synthetic engine oil — a specification common to most Dodge Nit-series vehicles.

Selecting the correct oil viscosity for your Dodge Nitro 4WD is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the Dodge Nitro 4WD is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your Dodge Nitro 4WD, always replace the oil filter at every oil change. Using a quality filter — such as the Mann or Mahle filters specified for Dodge engines — ensures proper oil pressure and prevents unfiltered oil from circulating through the engine.

Oil change costs for the Dodge Nitro 4WD at a US dealership or independent European specialist typically range from $120 to $200 for a full synthetic service. DIY oil changes cost approximately $60–$90 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Dodge Nitro 4WD configurations may have different requirements.