Chrysler 300C AWD Engine Oil Specs
Engine oil type, capacity & service interval for the Chrysler 300C AWD (2005–2006). Select your year below for full specifications.
Choose 300C AWD year
Select Year – Chrysler 300C AWD Engine Oil
2 years foundChrysler 300C AWD Engine Oil Specs by Year
All 2 yearsChrysler 300C AWD Engine Oil Guide
The Chrysler 300C AWD was produced from 2005 to 2006. This model typically uses 10W-30 full synthetic engine oil — a specification common to most Chrysler 300-series vehicles.
Selecting the correct oil viscosity for your Chrysler 300C AWD is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Chrysler 300C AWD is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Chrysler 300C AWD, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.
Oil change costs for the Chrysler 300C AWD at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Chrysler 300C AWD configurations may have different requirements.
Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.
Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.