Chevrolet Cobalt XFE Engine Oil Specs
Engine oil type, capacity & service interval for the Chevrolet Cobalt XFE (2008–2009). Select your year below for full specifications.
Choose Cobalt XFE year
Select Year – Chevrolet Cobalt XFE Engine Oil
2 years foundChevrolet Cobalt XFE Engine Oil Specs by Year
All 2 yearsChevrolet Cobalt XFE Engine Oil Guide
The Chevrolet Cobalt XFE was produced from 2008 to 2009. This model typically uses 5W-20 full synthetic engine oil — a specification common to most Chevrolet Cob-series vehicles.
Selecting the correct oil viscosity for your Chevrolet Cobalt XFE is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Chevrolet Cobalt XFE is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Chevrolet Cobalt XFE, always replace the oil filter at every oil change. Using a quality filter — such as ACDelco or Mobil 1 filters matching GM specifications — helps maintain optimal filtration.
Oil change costs for the Chevrolet Cobalt XFE at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Chevrolet Cobalt XFE configurations may have different requirements.
General Motors engines require oil certified with the dexos1 Gen 3 or dexos2 standard to protect direct-injection valvetrains.
Reset the Engine Oil Life system via the driver information center or by pumping the accelerator pedal three times with ignition ON.