Verified Specs 2026 US Market

2007 Audi A3 Engine Oil Type, Capacity & Service Interval

Oil Type: 0W-20  ·  Capacity: 4.0 Quarts  ·  Change Every 7,500 Miles

Engine

2L 4-Cylinder

Technical Oil Specifications
Ref: fueleconomy

Recommended Oil Type

0W-20

Viscosity grade

Oil Capacity

4.0 quarts

Including filter

Change Interval

7,500 miles

Or 12 months

Oil Filter

Fram CH10251

Compatible part number

Engine Size

2L

4 Cylinders

Fuel Type

Gasoline

Manufacturer specified

The 2007 Audi A3 requires 0W-20 engine oil with a capacity of 4.0 quarts (including filter). The recommended oil change interval is every 7,500 miles or 12 months, whichever comes first. The compatible oil filter is Fram CH10251. Estimated oil change cost at a US service center ranges from $30 to $60.

2007 Audi A3 Recommended Oil Type & Formulation

For the 2007 Audi A3, the manufacturer recommends 0W-20 full synthetic engine oil. Using the correct viscosity grade maintains proper lubrication across all operating temperatures and ensures your engine meets fuel economy specifications.

Use synthetic oil for optimal performance. Check owner's manual for specific recommendations.

What does 0W-20 mean? The first number (0W) indicates cold-weather viscosity — lower is better for cold starts. The second number (20) indicates viscosity at operating temperature — higher provides more protection under load.

2007 Audi A3 Oil Change Interval & Maintenance Schedule

7,500

Recommended Miles

12

Recommended Months

Change oil every 7,500 miles or 12 months, or as recommended by the manufacturer.

2007 Audi A3 Oil Change Cost Breakdown

Service Type Estimated Cost Notes
DIY (Parts Only) $20–$30 Oil + filter only
Quick Lube Shop $30–$60 Jiffy Lube, Valvoline, Firestone
Dealership $60–$100 OEM parts, manufacturer certified

Prices vary by location and current oil prices. Always get a quote before service.

DIY Oil Change Tips for the Audi A3

Performing your own oil change on the 2007 Audi A3 can save $30–$60 per service. You will need: 4.0 quarts of 0W-20 full synthetic oil, a Fram CH10251, a drain pan, and a Audi-compatible oil filter wrench.

Allow the engine to warm up for 2–3 minutes before draining, then cool for 10 minutes. Torque the drain plug to manufacturer spec (typically 18–25 ft-lbs) to prevent leaks. Reset the oil life monitor if equipped after completing the service.

⚠ Reference Only: Always verify specifications with your official owner's manual. Oil specs may vary by trim level and engine variant. Consult a certified mechanic if unsure.

Need More Audi A3 Maintenance Data?

Our technical specs are updated for 2026. If you noticed an error or need specialized engine data for your specific trim, contact our support team.

Request Specification Update